Chemical Datasheet
4,4'-SULFONYLDIANILINE |
Chemical Identifiers
The
Chemical Identifier fields
include common identification numbers, the
NFPA diamond
U.S. Department of Transportation hazard labels, and a general
description of the chemical. The information in CAMEO Chemicals comes
from a variety of
data sources.
CAS Number | UN/NA Number | DOT Hazard Label | USCG CHRIS Code |
---|---|---|---|
|
none | data unavailable | none |
NIOSH Pocket Guide | International Chem Safety Card | ||
none | none |
NFPA 704
data unavailable
General Description
PHYSICAL DESCRIPTION: Odorless white or creamy white crystalline powder. Slightly bitter taste. (NTP, 1992)
Hazards
The
Hazard fields
include
special hazard alerts
air and water
reactions, fire hazards, health hazards, a reactivity profile, and
details about
reactive groups assignments
and
potentially incompatible absorbents.
The information in CAMEO Chemicals comes from a variety of
data sources.
Reactivity Alerts
none
Air & Water Reactions
Sensitive to oxidation and light. Insoluble in water.
Fire Hazard
This chemical is probably combustible. (NTP, 1992)
Health Hazard
SYMPTOMS: Symptoms of exposure to this compound include somnolence, retinal changes, cyanosis, jaundice, changes in tubules and other kidney changes, hemolysis with or without anemia, joint effects, hepatitis, dermatitis and peripheral neuritis. Other symptoms include peripheral motor neuropathy, retinal damage, optic atrophy and, in large doses, intravascular hemolysis, methemoglobinemia, renal failure, hemorrhages and exudates in fundi, localized capillary non-perfusion by angiography, and permanent poor vision. Prolonged skin exposure may lead to irritation. Severe eye irritation, irritation of the nose and throat and sneezing also occur. Exposure may cause restlessness, coma, hematuria, gastrointestinal irritation, maculopapular, erythematous skin eruptions, fever, mental disturbances, visual disturbances, oliguria or anuria with azotemia, agranulocytosis, thrombocytopenia, purpura, conjunctival injection, bullous lesions of the skin, petechiae, increased erythema, injury from sunlight, renal damage and death. It may also cause sore throat, pallor, aplastic anemia, other blood dyscrasias, exfoliative dermatitis, erythema multiforme, toxic epidermal necrolysis, morbilliform and scarlatiniform reactions, urticaria, erythema nodosum, muscle weakness, nausea, vomiting, abdominal pain, vertigo, blurred vision, tinnitus, insomnia, headache, psychosis, phototoxicity, tachycardia, albuminuria, the nephrotic syndrome, hypoalbuminemia without proteinuria, renal papillary necrosis, male infertility, drug-induced lupus erythematosus, an infectious mononucleosis-like syndrome, severe anoxia, hyperexcitability, methemoglobin induced depression and convulsions. Other symptoms may include anorexia, dizziness, nervousness, lymphadenitis, fixed drug eruptions, and eosinophilia. This compound can cause Heinz-body formation, paresthesia, pruritus, exacerbation of lepromatous leprosy in malnourished persons, malaise, hepatic necrosis and lymphadenopathy. It can also cause leukopenia, pseudo-leukemia and abnormalities in liver function tests.
ACUTE/CHRONIC HAZARDS: This compound is harmful if swallowed, inhaled or absorbed through the skin. It may cause irritation. When heated to decomposition it emits very toxic fumes of carbon monoxide, carbon dioxide, nitrogen oxides and sulfur oxides. (NTP, 1992)
ACUTE/CHRONIC HAZARDS: This compound is harmful if swallowed, inhaled or absorbed through the skin. It may cause irritation. When heated to decomposition it emits very toxic fumes of carbon monoxide, carbon dioxide, nitrogen oxides and sulfur oxides. (NTP, 1992)
Reactivity Profile
4,4'-SULFONYLDIANILINE can neutralize acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated in combination with strong reducing agents, such as hydrides. Incompatible with strong oxidizing agents. Also incompatible with epoxy resins under uncontrolled conditions (NTP, 1992).
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents
No information available.
Response Recommendations
The
Response Recommendation fields
include isolation and evacuation distances, as well as recommendations for
firefighting, non-fire response, protective clothing, and first aid. The
information in CAMEO Chemicals comes from a variety of
data sources.
Isolation and Evacuation
No information available.
Firefighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used. (NTP, 1992)
Non-Fire Response
SMALL SPILLS AND LEAKAGE: If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures. (NTP, 1992)
STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures. (NTP, 1992)
Protective Clothing
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.
OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.
OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)
Physical Properties
The
Physical Property fields
include properties such as vapor pressure and
boiling point, as well as explosive limits and
toxic exposure thresholds
The information in CAMEO Chemicals comes from a variety of
data sources.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Chemical Formula: |
|
Flash Point:
greater than 320°F
(NTP, 1992)
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point:
347 to 349°F
(NTP, 1992)
Vapor Pressure: data unavailable
Vapor Density (Relative to Air):
8.3
(NTP, 1992)
- Heavier than air; will sink
Specific Gravity:
1.33
at 77°F
(NTP, 1992)
- Denser than water; will sink
Boiling Point: data unavailable
Molecular Weight:
248.3
(NTP, 1992)
Water Solubility:
less than 1 mg/mL
at 68°F
(NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable
AEGLs (Acute Exposure Guideline Levels)
No AEGL information available.ERPGs (Emergency Response Planning Guidelines)
No ERPG information available.PACs (Protective Action Criteria)
Chemical | PAC-1 | PAC-2 | PAC-3 |
---|---|---|---|
Diaminodiphenylsulfone; (4,4'-Sulfonyldianiline) (80-08-0) | 0.087 ppm | 0.96 ppm | 7.7 ppm |
(DOE, 2024)
Regulatory Information
The
Regulatory Information fields
include information from
the U.S. Environmental Protection Agency's Title III Consolidated List of
Lists,
the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility
Anti-Terrorism Standards,
and the U.S. Occupational Safety and Health Administration's
Process Safety Management of Highly Hazardous Chemicals Standard List
(see more about these
data sources).
EPA Consolidated List of Lists
No regulatory information available.CISA Chemical Facility Anti-Terrorism Standards (CFATS)
No regulatory information available.OSHA Process Safety Management (PSM) Standard List
No regulatory information available.Alternate Chemical Names
This section provides a listing of alternate names for this chemical,
including trade names and synonyms.
- 4-AMINOPHENYL SULFONE
- ANILINE, 4,4'-SULFONYLDI-
- ARALDITE HT 976
- AVLOSULFON
- AVLOSULPHONE
- BENZENAMINE, 4,4'-SULFONYLBIS-
- BIS(4-AMINOPHENYL) SULFONE
- BIS(4-AMINOPHENYL)SULPHONE
- BIS(P-AMINOPHENYL) SULFONE
- BIS(P-AMINOPHENYL)SULPHONE
- CROYSULFONE
- CROYSULPHONE
- DADPS
- DAPSON
- DAPSONE
- 4,4'-DAPSONE
- DAPSONUM
- DDS
- DDS (PHARMACEUTICAL)
- DDS (VAN)
- DI(4-AMINOPHENYL) SULFONE
- DI(4-AMINOPHENYL)SULFONE
- DI(4-AMINOPHENYL)SULPHONE
- DI(P-AMINOPHENYL) SULFONE
- DI(P-AMINOPHENYL)SULPHONE
- DIAMINO-4,4'-DIPHENYL SULFONE
- DIAMINO-4,4'-DIPHENYL SULPHONE
- 4,4'-DIAMINODIPHENYL SULFONE
- 4,4'-DIAMINODIPHENYL SULPHONE
- 4,4'-DIAMINOPHENYL SULFONE
- DIAPHENYLSULFON
- DIAPHENYLSULFONE
- DIAPHENYLSULPHON
- DIAPHENYLSULPHONE
- DIPHENASONE
- DIPHONE
- DISULONE
- DSS
- DUBRONAX
- DUMITONE
- EPORAL
- F 1358
- 1358F
- HARDENER HT 976
- HT 9664
- HT 976
- ICI
- MALOPRIM
- METABOLITE C
- NCI-C01718
- NOVOPHONE
- NSC 6091
- NSC 6091D
- NSC-6091
- P,P'-DIAMINODIPHENYL SULFONE
- P,P'-DIAMINODIPHENYL SULPHONE
- P,P'-SULFONYLBISBENZAMINE
- P,P'-SULFONYLDIANILINE
- P,P'-SULPHONYLBISBENZAMINE
- P,P'-SULPHONYLBISBENZENAMINE
- P,P'-SULPHONYLDIANILINE
- P-AMINOPHENYL SULFONE
- SEIKACURE S
- SULFONA
- SULFONA-MAE
- SULFONE UCB
- 1,1'-SULFONYLBIS(4-AMINOBENZENE)
- 4,4'-SULFONYLBISANILINE
- 4,4'-SULFONYLBISBENZAMINE
- 1,1'-SULFONYLBIS[4-AMINOBENZENE]
- 4,4'-SULFONYLDIANILINE
- SULPHADIONE
- SULPHON-MERE
- 1,1'-SULPHONYLBIS(4-AMINOBENZENE)
- 4,4'-SULPHONYLBISBENZAMINE
- 4,4'-SULPHONYLBISBENZENAMINE
- SULPHONYLDIANILINE
- 4,4'-SULPHONYLDIANILINE
- SUMICURE S
- TARIMYL
- UDOLAC
- WR 448