Chemical Datasheet
C.I. SOLVENT YELLOW 14 |
Chemical Identifiers
![](javascript:dropDownText("sec1_help","sec1_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Chemical Identifier fields
include common identification numbers, the
NFPA diamond
U.S. Department of Transportation hazard labels, and a general
description of the chemical. The information in CAMEO Chemicals comes
from a variety of
data sources.
| CAS Number | UN/NA Number | DOT Hazard Label | USCG CHRIS Code |
|---|---|---|---|
|
none | data unavailable | none |
| NIOSH Pocket Guide | International Chem Safety Card | ||
| none | none | ||
NFPA 704
data unavailable
General Description
PHYSICAL DESCRIPTION: Dark reddish-yellow leaflets or orange powder. Slight odor. (NTP, 1992)
Hazards
![](javascript:dropDownText("sec2_help","sec2_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Hazard fields
include
special hazard alerts
air and water
reactions, fire hazards, health hazards, a reactivity profile, and
details about
reactive groups assignments
and
potentially incompatible absorbents.
The information in CAMEO Chemicals comes from a variety of
data sources.
Reactivity Alerts
- Explosive
Air & Water Reactions
Azo dyes can be explosive when suspended in air at certain concentrations. Insoluble in water.
Fire Hazard
Flash point data for this chemical are not available; however, it is probably combustible. (NTP, 1992)
Health Hazard
SYMPTOMS: Exposure to this compound may result in irritation.
ACUTE/CHRONIC HAZARDS: This compound may cause irritation and is harmful if swallowed. It is also harmful if inhaled. When heated to decomposition it emits toxic fumes of carbon monoxide, carbon dioxide and nitrogen oxides. (NTP, 1992)
ACUTE/CHRONIC HAZARDS: This compound may cause irritation and is harmful if swallowed. It is also harmful if inhaled. When heated to decomposition it emits toxic fumes of carbon monoxide, carbon dioxide and nitrogen oxides. (NTP, 1992)
Reactivity Profile
C.I. SOLVENT YELLOW 14 is an azo compound. Azo, diazo, azido compounds can detonate. This applies in particular to organic azides that have been sensitized by the addition of metal salts or strong acids. Toxic gases are formed by mixing materials of this class with acids, aldehydes, amides, carbamates, cyanides, inorganic fluorides, halogenated organics, isocyanates, ketones, metals, nitrides, peroxides, phenols, epoxides, acyl halides, and strong oxidizing or reducing agents. Flammable gases are formed by mixing materials in this group with alkali metals. Explosive combination can occur with strong oxidizing agents, metal salts, peroxides, and sulfides. This chemical is incompatible with strong oxidizing agents and strong acids (NTP, 1992).
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents
No information available.
Response Recommendations
![](javascript:dropDownText("sec3_help","sec3_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Response Recommendation fields
include isolation and evacuation distances, as well as recommendations for
firefighting, non-fire response, protective clothing, and first aid. The
information in CAMEO Chemicals comes from a variety of
data sources.
Isolation and Evacuation
No information available.
Firefighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used. (NTP, 1992)
Non-Fire Response
SMALL SPILLS AND LEAKAGE: If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the adsorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
STORAGE PRECAUTIONS: You should protect this material from exposure to light. Keep it away from oxidizing materials and store it at ambient temperatures. (NTP, 1992)
STORAGE PRECAUTIONS: You should protect this material from exposure to light. Keep it away from oxidizing materials and store it at ambient temperatures. (NTP, 1992)
Protective Clothing
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.
OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.
OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)
Physical Properties
![](javascript:dropDownText("sec4_help","sec4_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Physical Property fields
include properties such as vapor pressure and
boiling point, as well as explosive limits and
toxic exposure thresholds
The information in CAMEO Chemicals comes from a variety of
data sources.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
| Chemical Formula: |
|
Flash Point: data unavailable
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point:
268 to 271°F
(NTP, 1992)
Vapor Pressure: data unavailable
Vapor Density (Relative to Air): data unavailable
Specific Gravity:
0.18
(NTP, 1992)
- Less dense than water; will float
Boiling Point:
greater than 212°F
at 760 mmHg
(sublimes)
(NTP, 1992)
Molecular Weight:
248.3
(NTP, 1992)
Water Solubility:
less than 0.1 mg/mL
at 64°F
(NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable
AEGLs (Acute Exposure Guideline Levels)
No AEGL information available.ERPGs (Emergency Response Planning Guidelines)
No ERPG information available.PACs (Protective Action Criteria)
No PAC information available.Regulatory Information
![](javascript:dropDownText("sec5_help","sec5_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Regulatory Information fields
include information from
the U.S. Environmental Protection Agency's Title III Consolidated List of
Lists,
the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility
Anti-Terrorism Standards,
and the U.S. Occupational Safety and Health Administration's
Process Safety Management of Highly Hazardous Chemicals Standard List
(see more about these
data sources).
EPA Consolidated List of Lists
| Regulatory Name | CAS Number/ 313 Category Code |
EPCRA 302 EHS TPQ |
EPCRA 304 EHS RQ |
CERCLA RQ | EPCRA 313 TRI |
RCRA Code |
CAA 112(r) RMP TQ |
|---|---|---|---|---|---|---|---|
| C.I. Solvent Yellow 14 | 842-07-9 | 313 |
(EPA List of Lists, 2024)
CISA Chemical Facility Anti-Terrorism Standards (CFATS)
No regulatory information available.OSHA Process Safety Management (PSM) Standard List
No regulatory information available.Alternate Chemical Names
![](javascript:dropDownText("sec6_help","sec6_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
This section provides a listing of alternate names for this chemical,
including trade names and synonyms.
- ALPHA-PHENYLAZO-BETA-NAPHTHOL
- ATUL ORANGE R
- BENZENE-1-AZO-2-NAPHTHOL
- 1-BENZENEAZO-2-NAPHTHOL
- BENZENEAZO-BETA-NAPHTHOL
- 1-BENZOAZO-2-NAPHTHOL
- BRASILAZINA OIL ORANGE
- BRILLIANT OIL ORANGE R
- C.I. 12055
- C.I. DISPERSE YELLOW 97
- C.I. SOLVENT YELLOW 14
- CALCO OIL ORANGE 7078
- CALCO OIL ORANGE 7078-Y
- CALCO OIL ORANGE Z-7078
- CALCOGAS M
- CALCOGAS ORANGE NC
- CAMPBELLINE OIL ORANGE
- CARMINAPH
- CERES ORANGE R
- CEROTINORANGE G
- DISPERSE YELLOW 97
- DISPERSOL YELLOW PP
- DUNKELGELB
- ENIAL ORANGE I
- FAST OIL ORANGE
- FAST OIL ORANGE I
- FAST ORANGE
- FAT ORANGE 4A
- FAT ORANGE G
- FAT ORANGE I
- FAT ORANGE R
- FAT ORANGE RS
- FAT SOLUBLE ORANGE
- FETTORANGE 4A
- FETTORANGE LG
- FETTORANGE R
- GRASAL ORANGE
- GRASAN ORANGE R
- HIDACO OIL ORANGE
- 2-HYDROXY-1-(PHENYLAZO)NAPHTHALENE
- 1-(2-HYDROXYNAPHTHYL)AZOBENZENE
- 2-HYDROXYNAPHTHYL-1-AZOBENZENE
- LACQUER ORANGE VG
- MORTON ORANGE Y
- MOTIORANGE R
- 2-NAPHTHOL, 1-(PHENYLAZO)-
- 1,2-NAPHTHOQUINONE-1-PHENYLHYDRAZONE
- NCI-C53929
- OIL ORANGE
- OIL ORANGE 2311
- OIL ORANGE 2B
- OIL ORANGE 31
- OIL ORANGE 7078-V
- OIL ORANGE E
- OIL ORANGE EP
- OIL ORANGE G
- OIL ORANGE PEL
- OIL ORANGE PS
- OIL ORANGE R
- OIL ORANGE R-14
- OIL ORANGE Z-7078
- OIL SOLUBLE ORANGE
- OLEAL ORANGE R
- ORANGE 2 INSOLUBLE
- ORANGE 3RA SOLUBLE IN GREASE
- ORANGE A L'HUILE
- ORANGE INSOLUBLE OLG
- ORANGE PEL
- ORANGE R FAT SOLUBLE
- ORANGE RESENOLE NO. 3
- ORANGE SOLUBLE A L'HUILE
- ORGANOL ORANGE
- ORIENT OIL ORANGE PS
- PETROL ORANGE Y
- 1-(PHENYLAZO)-2-HYDROXYNAPHTHALENE
- 1-(PHENYLAZO)-2-NAPHTHALENOL
- 1-(PHENYLAZO)-2-NAPHTHOL
- 1-PHENYLAZO-2-NAPHTHALENOL
- 1-PHENYLAZO-2-NAPHTHOL
- 1-PHENYLAZO-BETA-NAPHTHOL
- PLASTORESIN ORANGE F 4A
- PLASTORESIN ORANGE F4A
- PYRONALORANGE
- RESINOL ORANGE R
- RESOFORM ORANGE G
- SANSEL ORANGE G
- SCHARLACH B
- SILOTRAS ORANGE TR
- SOLVENT YELLOW 14
- SOMALIA ORANGE I
- SOUDAN I
- SPIRIT ORANGE
- SPIRIT YELLOW I
- STEARIX ORANGE
- SUDAN 1
- SUDAN I
- SUDAN J
- SUDAN ORANGE 220
- SUDAN ORANGE R
- SUDAN ORANGE RA
- SUDAN ORANGE RA NEW
- SUDAN YELLOW
- TERTROGRAS ORANGE SV
- TOYO OIL ORANGE
- WAXAKOL ORANGE GL
- WAXOLINE ORANGE EP-FW
- WAXOLINE YELLOW I
- WAXOLINE YELLOW IM
- WAXOLINE YELLOW IP
- WAXOLINE YELLOW IS
Web site owner:
Office of Response and Restoration
,
National Ocean Service,
National Oceanic and Atmospheric Administration.
USA.gov.
CAMEO Chemicals version 3.1.0 rev 1.