Chemical Datasheet
CYCLOPHOSPHAMIDE MONOHYDRATE |
Chemical Identifiers
The
Chemical Identifier fields
include common identification numbers, the
NFPA diamond
U.S. Department of Transportation hazard labels, and a general
description of the chemical. The information in CAMEO Chemicals comes
from a variety of
data sources.
CAS Number | UN/NA Number | DOT Hazard Label | USCG CHRIS Code |
---|---|---|---|
|
|
none | |
NIOSH Pocket Guide | International Chem Safety Card | ||
none | none |
NFPA 704
data unavailable
General Description
PHYSICAL DESCRIPTION: Fine white crystalline powder with a slightly bitter taste. Little or no odor. (NTP, 1992)
Hazards
The
Hazard fields
include
special hazard alerts
air and water
reactions, fire hazards, health hazards, a reactivity profile, and
details about
reactive groups assignments
and
potentially incompatible absorbents.
The information in CAMEO Chemicals comes from a variety of
data sources.
Reactivity Alerts
none
Air & Water Reactions
Water soluble. Sensitive to moisture and light. Aqueous solutions may be kept for a few hours above room temperature, but hydrolysis occurs at temperatures above 86°F. It undergoes both specific acid and specific base catalysis at extreme pHs. Spontaneous hydrolysis in aqueous solutions.
Fire Hazard
This chemical is probably combustible. (NTP, 1992)
Health Hazard
SYMPTOMS: Symptoms of exposure to this compound may include sterility, testicular atrophy, hematuria, nausea, anorexia, abdominal discomfort or pain, diarrhea, hemorrhagic colitis, oral mucosal ulceration, jaundice, pigmentation of the skin and changes in nails, neutropenia, thrombocytopenia, anemia, urinary bladder fibrosis, hemorrhagic ureteritis, interstitial pulmonary fibrosis, anaphylactic reaction, death, suppression of immune system, interference with normal wound healing, amenorrhea associated with decreased estrogen and increased gonadotropin secretion, ovarian fibrosis with apparently complete loss of germ cells. When administered to pregnant women it may cause the fetus to have ectrodactylia. It may cause transient blurring of vision and blepharoconjunctivitus. It may also cause blood, bladder, lung and cardiac changes, gonadal suppression, skin rash and conjunctivitis. Other symptoms of exposure may include leukopenia, lymphocytopenia, reversible alopecia, hemorrhagic cystitis, vomiting, acute and fatal myopericarditis, necrosis of the renal tubular epithelium, hemorrhagic pancreatitis, reduced sperm count, occasional pneumonitis and adverse effects on the thyroid. It may cause myocardial damage. It may also cause chromosomal aberrations and sister chromatid exchanges.
ACUTE/CHRONIC HAZARDS: This compound may be harmful if swallowed, inhaled or absorbed through the skin. It may cause irritation. When heated to decomposition it emits toxic fumes of carbon monoxide, carbon dioxide, nitrogen oxides, phosphorus oxides, phosphine and hydrogen chloride gas. (NTP, 1992)
ACUTE/CHRONIC HAZARDS: This compound may be harmful if swallowed, inhaled or absorbed through the skin. It may cause irritation. When heated to decomposition it emits toxic fumes of carbon monoxide, carbon dioxide, nitrogen oxides, phosphorus oxides, phosphine and hydrogen chloride gas. (NTP, 1992)
Reactivity Profile
Polymerization can occur at temperatures > 120°F. CYCLOPHOSPHAMIDE MONOHYDRATE reacts with strong oxidizing agents, strong acids and strong bases. Benzyl alcohol increases rate of hydrolysis. (NTP, 1992)
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents
Use caution: Liquids with this reactive group classification have been known to react with the absorbent listed below. More info about absorbents, including situations to watch out for...
- Mineral-Based & Clay-Based Absorbents
Response Recommendations
The
Response Recommendation fields
include isolation and evacuation distances, as well as recommendations for
firefighting, non-fire response, protective clothing, and first aid. The
information in CAMEO Chemicals comes from a variety of
data sources.
Isolation and Evacuation
Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:
IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.
SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.
FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)
IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.
SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.
FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)
Firefighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be use. (NTP, 1992)
Non-Fire Response
SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
STORAGE PRECAUTIONS: You should protect this material from exposure to light and moisture. Keep it away from oxidizing materials and store it under refrigerated temperatures. If possible, it would be prudent to store this compound under inert atmosphere. (NTP, 1992)
STORAGE PRECAUTIONS: You should protect this material from exposure to light and moisture. Keep it away from oxidizing materials and store it under refrigerated temperatures. If possible, it would be prudent to store this compound under inert atmosphere. (NTP, 1992)
Protective Clothing
MINIMUM PROTECTIVE CLOTHING: If Tyvek-type disposable protective clothing is not worn during handling of this chemical, wear disposable Tyvek-type sleeves taped to your gloves.
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). (NTP, 1992)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Generally, the induction of vomiting is NOT recommended outside of a physician's care due to the risk of aspirating the chemical into the victim's lungs. However, if the victim is conscious and not convulsing and if medical help is not readily available, consider the risk of inducing vomiting because of the high toxicity of the chemical ingested. Ipecac syrup or salt water may be used in such an emergency. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.
OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Generally, the induction of vomiting is NOT recommended outside of a physician's care due to the risk of aspirating the chemical into the victim's lungs. However, if the victim is conscious and not convulsing and if medical help is not readily available, consider the risk of inducing vomiting because of the high toxicity of the chemical ingested. Ipecac syrup or salt water may be used in such an emergency. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.
OTHER: Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure. (NTP, 1992)
Physical Properties
The
Physical Property fields
include properties such as vapor pressure and
boiling point, as well as explosive limits and
toxic exposure thresholds
The information in CAMEO Chemicals comes from a variety of
data sources.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Chemical Formula: |
|
Flash Point:
greater than 230°F
(NTP, 1992)
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point:
121 to 127°F
(NTP, 1992)
Vapor Pressure: data unavailable
Vapor Density (Relative to Air): data unavailable
Specific Gravity: data unavailable
Boiling Point: data unavailable
Molecular Weight:
279.1
(NTP, 1992)
Water Solubility:
10 to 50 mg/mL
at 73°F
(NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable
AEGLs (Acute Exposure Guideline Levels)
No AEGL information available.ERPGs (Emergency Response Planning Guidelines)
No ERPG information available.PACs (Protective Action Criteria)
No PAC information available.Regulatory Information
The
Regulatory Information fields
include information from
the U.S. Environmental Protection Agency's Title III Consolidated List of
Lists,
the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility
Anti-Terrorism Standards,
and the U.S. Occupational Safety and Health Administration's
Process Safety Management of Highly Hazardous Chemicals Standard List
(see more about these
data sources).
EPA Consolidated List of Lists
No regulatory information available.CISA Chemical Facility Anti-Terrorism Standards (CFATS)
No regulatory information available.OSHA Process Safety Management (PSM) Standard List
No regulatory information available.Alternate Chemical Names
This section provides a listing of alternate names for this chemical,
including trade names and synonyms.
- B 518
- 2-(BIS(2-CHLOROETHYL)AMINE)TETRAHYDRO-[2H]-1,3,2-OXAZAPHOSPHORINE 2-OXIDE MONOHYDRATE
- 2-(BIS(2-CHLOROETHYL)AMINO)-1-OXA-3-AZA-2-PHOSPHOCYCLOHEXANE 2-OXIDE MONOHYDRATE
- 1-BIS(2-CHLOROETHYL)AMINO-1-OXO-2-AZA-5-OXAPHOSPHORIDINE MONOHYDRATE
- BIS(2-CHLOROETHYL)PHOSPHORAMIDE CYCLIC PROPANOLAMIDE ESTER MONOHYDRATE
- (BIS(CHLORO-2-ETHYL)AMINO)-2-TETRAHYDRO-3,4,5,6-OXAZAPHOSPHORINE-1,3,2-OXIDE-2 MONOHYDRATE
- CB-4564
- CLAFEN
- CYCLIC N',O-PROPYLENE ESTER OF N,N-BIS(2-CHLOROETHYL)PHOSPHORODIAMIDIC ACID MONOHYDRATE
- CYCLOPHOSPHAMID MONOHYDRATE
- CYCLOPHOSPHAMIDE HYDRATE
- CYCLOPHOSPHAMIDE MONOHYDRATE
- CYCLOPHOSPHAMIDUM
- CYCLOPHOSPHAN
- CYCLOPHOSPHANE
- CYCLOPHOSPHANUM
- CYTOPHOSPHAN
- CYTOXAN
- 2-(DI(2-CHLOROETHYL)AMINO)-1-OXA-3-AZA-2-PHOSPHACYCLOHEXANE 2-OXIDE MONOHYDRATE
- ENDOXAN MONOHYDRATE
- ENDOXAN R
- ENDOXAN-ASTA
- ENDOXANA
- ENDUXAN
- GENOXAL
- 2H-1,3,2-OXAZAPHOSPHORINE, 2-[BIS(2-CHLOROETHYL)AMINO]TETRAHYDRO-, 2-OXIDE, MONOHYDRATE
- MITOXAN
- N,N-BIS(2-CHLOROETHYL)-N'-(3-HYDROXYPROPYL)PHOSPHORODIAMIDIC ACID INTRA-MOLECULAR ESTER MONOHYDRATE
- N,N-BIS(2-CHLOROETHYL)TETRAHYDRO-2H-1,3,2-OXAPHOSPHORIN-2-AMINE, 2-OXIDE MONOHYDRATE
- N,N-BIS(BETA-CHLOROETHYL)-N',O-PROPYLENEPHOSPHORIC ACID ESTER AMIDE MONOHYDRATE
- N,N-BIS(BETA-CHLOROETHYL)-N',O-TRIMETHYLENEPHOSPHORIC ACID ESTER DIAMIDE MONOHYDRATE
- N,N-DI(2-CHLOROETHYL)AMINO-N,O-PROPYLENE PHOSPHORIC ACID ESTER DIAMIDE MONOHYDRATE
- NSC 26271
- PROCYTOX
- SEMDOXAN
- SENDOXAN
- SENDUXAN
- TETRAHYDRO-2-(BIS(2-CHLOROETHYL)AMINO)-2H-1,3,2-OXAZAPHOSPHORINE 2-OXIDE MONOHYDRATE