CHLORINE TRIFLUORIDE

Diamond	Hazard	Value	Description
0 4 3 W ox	Health	4	Can be lethal.
	Flammability	0	Will not burn under typical fire conditions.
	Instability	3	Capable of detonation or explosive decomposition or explosive reaction but requires a strong initiating source or must be heated under confinement before initiation.
	Special	W OX	Reacts violently or explosively with water. Possesses oxidizing properties.

A colorless gas or green liquid with a pungent odor. Boils at 53°F. It reacts with water to form chlorine and hydrofluoric acid with release of heat. Contact with organic materials may result in spontaneous ignition. It is corrosive to metals and tissue. Prolonged exposure to low concentrations or short term exposure to high concentrations may result in adverse health effects. Under prolonged exposure to fire or intense heat the container may violently rupture and rocket.

• Strong Oxidizing Agent
• Water-Reactive

A violent reaction occurs with water or ice generating acidic HF and chlorine, [Sidgwick, 1156(1950)]. The release of Chlorine Trifluoride to the atmosphere rapidly generates two toxic reaction products: HF and Chlorine Dioxide, [Lombardi, D.A. and M.D. Cheng 1996. "Modeling Accidental Releases of Chlorine Trifluoride to the Atmosphere," Paper No. 96-WP66B.02, presented at the 89th Annual Meeting of the Air and Waste Management Association, Nashville, Tennessee, June 23-26].

Special Hazards of Combustion Products: If released from container, fumes are toxic and irritating.

Behavior in Fire: If released from container, can increase the intensity of fire. Containers may explode. (USCG, 1999)

Inhalation causes extreme irritation of respiratory tract; pulmonary edema may result. Vapors are very irritating to eyes and skin; liquid causes severe burns. (USCG, 1999)

CHLORINE TRIFLUORIDE is a low-boiling liquid (b.p. 12°C) which is irritating and toxic in the gaseous state. A highly reactive oxidant, it is spontaneously flammable and used as a rocket propellant. It is incompatible with fuels and nitro compounds. Interaction with water is violent and may be explosive, even with ice [Sidgwick, 1950, p. 1156]. It undergoes an immediate explosive reaction on contact with hydrocarbons or halocarbons even at -70°C [Brower, K. R., J. Fluorine Chem., 1986, 31, p. 333]. Solutions with carbon tetrachloride are capable of detonation, while solutions with nitroaryl compounds (TNT, hexanitrobiphenyl) or highly chlorinated compounds are extremely shock-sensitive. Violent, sometimes explosive reaction with hydrogen containing materials, e.g., acetic acid, ammonia, benzene, ether, coal gas, hydrogen, hydrogen sulfide, methane, or fluoroamino compounds. Ignition with fibrous materials (cotton, paper, wood). [Mellor, 1956, vol. 2, suppl. 1, p. 155]. Explosive gaseous products (chlorodifluoroamine) are formed with ammonium fluoride or ammonium hydrogen fluoride [Gardner, D. M. et al., Inorg., Chem., 1963, 2, p. 413]. Ignition occurs on contact with iodine, boron-containing materials (boron powder, tetraboron carbide, boron-aluminum), fibrous or finely divided refractory materials (asbestos, glass, wool, sand, tungsten carbide). Violent reactions occur with mineral acids (nitric acid, sulfuric acid), chromium trioxide, ruthenium metal, selenium tetrafluoride. [Bretherick, 5th ed., 1995, p. 1235]. Chlorine trifluoride is a hypergolic oxidizer and contact with a number of metals and their oxides (aluminum, antimony, arsenic, calcium, copper, iridium, iron, lithium, lead, magnesium, molybdenum, osmium, potassium, rhodium, sodium, selenium, silver, tellurium, tin, tungsten, zinc), nonmetals (phosphorus, silicon, sulfur), salts (mercury iodide, potassium iodide, silver, nitrate, potassium carbonate) will result in a violent reaction often followed by ignition [Mellor, 1956, vol. 2, suppl. 1, p. 155; Sidgwick, 1950, p. 1156].

• Oxidizing Agents, Strong
• Halogenating Agents

Use caution: Liquids with this reactive group classification have been known to react with the absorbents listed below.

• Cellulose-Based Absorbents
• Mineral-Based & Clay-Based Absorbents
• Expanded Polymeric Absorbents
• Dirt/Earth

Excerpt from 124 [Gases - Toxic and/or Corrosive - Oxidizing]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 100 meters (330 feet) in all directions.

SPILL: See ERG Table 1 - Initial Isolation and Protective Action Distances on the UN/NA 1749 datasheet.

FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2020)

Excerpt from 124 [Gases - Toxic and/or Corrosive - Oxidizing]:

SMALL FIRE: CAUTION: These materials do not burn but will support combustion. Some will react violently with water. Contain fire and let burn. If fire must be fought, water spray or fog is recommended. Water only; no dry chemical, CO2 or Halon®. Do not get water inside containers. If it can be done safely, move undamaged containers away from the area around the fire. Damaged cylinders should be handled only by specialists.

FIRE INVOLVING TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Do not direct water at source of leak or safety devices; icing may occur. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned master stream devices or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2020)

Excerpt from 124 [Gases - Toxic and/or Corrosive - Oxidizing]:

Do not touch or walk through spilled material. Keep combustibles (wood, paper, oil, etc.) away from spilled material. Stop leak if you can do it without risk. Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to contact spilled material. Do not direct water at spill or source of leak. If possible, turn leaking containers so that gas escapes rather than liquid. Prevent entry into waterways, sewers, basements or confined areas. Isolate area until gas has dispersed. Ventilate the area. (ERG, 2020)

Excerpt from NIOSH Pocket Guide for Chlorine trifluoride:

Skin: PREVENT SKIN CONTACT - Wear appropriate personal protective clothing to prevent skin contact.

Eyes: PREVENT EYE CONTACT - Wear appropriate eye protection to prevent eye contact.

Wash skin: WHEN CONTAMINATED (LIQUID) - If this chemical is in liquid form, the worker should immediately wash the skin when it becomes contaminated.

Remove: WHEN WET OR CONTAMINATED (LIQUID) - If this chemical is in liquid form, work clothing that becomes wet or significantly contaminated should be removed and replaced.

Change: No recommendation is made specifying the need for the worker to change clothing after the workshift.

Provide:
• EYEWASH (LIQUID) - Eyewash fountains should be provided (when this chemical is in liquid form) in areas where there is any possibility that workers could be exposed to the substances; this is irrespective of the recommendation involving the wearing of eye protection.
• QUICK DRENCH (LIQUID) - Facilities for quickly drenching the body should be provided (when this chemical is in liquid form) within the immediate work area for emergency use where there is a possibility of exposure. [Note: It is intended that these facilities provide a sufficient quantity or flow of water to quickly remove the substance from any body areas likely to be exposed. The actual determination of what constitutes an adequate quick drench facility depends on the specific circumstances. In certain instances, a deluge shower should be readily available, whereas in others, the availability of water from a sink or hose could be considered adequate.] (NIOSH, 2023)

Normalized Breakthrough Times (in Minutes)

Chemical	CAS Number	State	QS	QC	SL	C3	TF	TP	RC	TK	RF
Chlorine trifluoride	7790-91-2	Vapor							45	45	45

Special Warning from DuPont: Tychem® and Tyvek® fabrics should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only...

(DuPont, 2023)

Excerpt from NIOSH Pocket Guide for Chlorine trifluoride:

Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.

Skin: WATER FLUSH IMMEDIATELY - If this chemical contacts the skin, immediately flush the contaminated skin with water. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water. Get medical attention promptly.

Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.

Swallow: MEDICAL ATTENTION IMMEDIATELY (LIQUID) - If this chemical in liquid form has been swallowed, get medical attention immediately. (NIOSH, 2023)

• CHLORINE FLUORIDE
• CHLORINE FLUORIDE (CL2F6)
• CHLORINE TRIFLUORIDE
• CHLORINE TRIFLUORIDE (CLF3)
• CHLOROTRIFLUORIDE
• CTF
• TRIFLUOROCHLORINE