HYDROGEN IODIDE, ANHYDROUS

A colorless to yellow/brown gas with an acrid odor. Nonflammable. Toxic by inhalation. Strongly irritates skin, eyes and mucous membranes. Long-term inhalation of low concentrations or short-term inhalation of high concentrations may result in adverse health effects. Prolonged exposure to fire or intense heat may cause the container to rupture and rocket.

• Known Catalytic Activity
• Water-Reactive

Dissolves exothermically in water. The heat may raise toxic and corrosive acidic fumes. Fumes in air.

Excerpt from 125 [Gases - Toxic and/or Corrosive]:

Some may burn but none ignite readily. Vapors from liquefied gas are initially heavier than air and spread along ground. Some of these materials may react violently with water. Cylinders exposed to fire may vent and release toxic and/or corrosive gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket. For UN1005: Anhydrous ammonia, at high concentrations in confined spaces, presents a flammability risk if a source of ignition is introduced. (ERG, 2020)

Excerpt from 125 [Gases - Toxic and/or Corrosive]:

TOXIC; may be fatal if inhaled, ingested or absorbed through skin. Vapors are extremely irritating and corrosive. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may cause environmental contamination. (ERG, 2020)

HYDROGEN IODIDE, ANHYDROUS is a strongly acidic gas. Reacts rapidly and exothermically with bases. Reacts with active metals in the presence of moisture, including such structural metals as aluminum and iron, to release hydrogen, a flammable gas. Can initiate the polymerization of certain alkenes. Reacts with cyanide compounds to release gaseous hydrogen cyanide. May generate flammable and/or toxic gases in contact with dithiocarbamates, isocyanates, mercaptans, nitrides, nitriles, sulfides, and reducing agents. Additional gas-generating reactions may occur with sulfites, nitrites, thiosulfates, dithionites, and carbonates. Can catalyze chemical reactions among other materials. Decomposes at high temperatures to generate toxic products. Reacts with oxidizing agents to give iodine (when passed through fuming nitric acid, each bubble produces iodine attended by a flash of red flame [Berichte 3:3660]. Ignites in contact with fluorine, dinitrogen trioxide, nitrogen dioxide/dinitrogen tetraoxide.

• Acids, Strong Non-oxidizing

No information available.

Excerpt from 125 [Gases - Toxic and/or Corrosive]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 100 meters (330 feet) in all directions.

SPILL: See ERG Table 1 - Initial Isolation and Protective Action Distances on the UN/NA 2197 datasheet.

FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 1600 meters (1 mile) in all directions; also, consider initial evacuation for 1600 meters (1 mile) in all directions. (ERG, 2020)

Excerpt from 125 [Gases - Toxic and/or Corrosive]:

SMALL FIRE: Dry chemical or CO2.

LARGE FIRE: Water spray, fog or regular foam. If it can be done safely, move undamaged containers away from the area around the fire. Do not get water inside containers. Damaged cylinders should be handled only by specialists.

FIRE INVOLVING TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Do not direct water at source of leak or safety devices; icing may occur. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2020)

Excerpt from 125 [Gases - Toxic and/or Corrosive]:

Do not touch or walk through spilled material. Stop leak if you can do it without risk. If possible, turn leaking containers so that gas escapes rather than liquid. Prevent entry into waterways, sewers, basements or confined areas. Do not direct water at spill or source of leak. Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to contact spilled material. Isolate area until gas has dispersed. (ERG, 2020)

Excerpt from ERG Guide 125 [Gases - Toxic and/or Corrosive]:

Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer when there is NO RISK OF FIRE. Structural firefighters' protective clothing provides thermal protection but only limited chemical protection. (ERG, 2020)

Normalized Breakthrough Times (in Minutes)

Chemical	CAS Number	State	QS	QC	SL	C3	TF	TP	RC	TK	RF
Hydriodic acid (47%)	10034-85-2	Liquid			>480				>480
Hydriodic acid (55-57%)	10034-85-2	Liquid				>480	>480	>480	>480	>480	>480

Special Warning from DuPont: Tychem® and Tyvek® fabrics should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only...

(DuPont, 2023)

Excerpt from 125 [Gases - Toxic and/or Corrosive]:

Call 911 or emergency medical service. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air if it can be done safely. Give artificial respiration if victim is not breathing. Do not perform mouth-to-mouth resuscitation if victim ingested or inhaled the substance; wash face and mouth before giving artificial respiration. Use a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with liquefied gas, thaw frosted parts with lukewarm water. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. In case of skin contact with hydrogen fluoride, anhydrous (UN1052), if calcium gluconate gel is available, rinse 5 minutes, then apply gel. Otherwise, continue rinsing until medical treatment is available. Keep victim calm and warm. Keep victim under observation. Effects of contact or inhalation may be delayed. (ERG, 2020)

• ANHYDROUS HYDRIODIC ACID
• HYDROGEN IODIDE
• HYDROGEN IODIDE (HI)
• HYDROGEN IODIDE, ANHYDROUS
• HYDROGEN IODIDE, [ANHYDROUS]
• HYDROGEN MONOIODIDE
• HYDROIODIC ACID