ACRYLAMIDE SOLUTION, [AQUEOUS]

Diamond	Hazard	Value	Description
2 2 2	Health	2	Can cause temporary incapacitation or residual injury.
	Flammability	2	Must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur.
	Instability	2	Readily undergoes violent chemical changes at elevated temperatures and pressures.
	Special

A colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.

• Polymerizable

Very soluble in water

Excerpt from 153 [Substances - Toxic and/or Corrosive (Combustible); polymerization hazard]:

Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. (ERG, 2020)

Excerpt from 153 [Substances - Toxic and/or Corrosive (Combustible); polymerization hazard]:

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause environmental contamination. (ERG, 2020)

ACRYLAMIDE SOLUTION is weakly basic. Can polymerize vigorously if mixed with peroxides. May react with azo and diazo compounds to generate toxic gases. Flammable gases may form by reaction with strong reducing agents. Combustion generates mixed oxides of nitrogen (NOx).

• Amides and Imides
• Acrylates and Acrylic Acids
• Polymerizable Compounds
• Water and Aqueous Solutions

Use caution: Liquids with this reactive group classification have been known to react with the absorbents listed below.

• Cellulose-Based Absorbents
• Mineral-Based & Clay-Based Absorbents
• Dirt/Earth

Excerpt from 153 [Substances - Toxic and/or Corrosive (Combustible); polymerization hazard]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.

SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.

FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2020)

Excerpt from 153 [Substances - Toxic and/or Corrosive (Combustible); polymerization hazard]:

SMALL FIRE: Dry chemical, CO2 or water spray.

LARGE FIRE: Dry chemical, CO2, alcohol-resistant foam or water spray. If it can be done safely, move undamaged containers away from the area around the fire. Dike runoff from fire control for later disposal.

FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. (ERG, 2020)

Excerpt from 153 [Substances - Toxic and/or Corrosive (Combustible); polymerization hazard]:

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2020)

Excerpt from ERG Guide 153(P) [Substances - Toxic and/or Corrosive (Combustible); polymerization hazard]:

Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer when there is NO RISK OF FIRE. Structural firefighters' protective clothing provides thermal protection but only limited chemical protection. (ERG, 2020)

Normalized Breakthrough Times (in Minutes)

Chemical	CAS Number	State	QS	QC	SL	C3	TF	TP	RC	TK	RF
Acrylamide (50%)	79-06-1	Liquid			>480		>480	>480	>480	>480	>480
Acrylicamide (50%)	79-06-1	Liquid			>480		>480	>480	>480	>480	>480
Propenamide (50%)	79-06-1	Liquid			>480		>480	>480	>480	>480	>480

Special Warning from DuPont: Tychem® and Tyvek® fabrics should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only...

(DuPont, 2023)

Excerpt from 153 [Substances - Toxic and/or Corrosive (Combustible); polymerization hazard]:

Call 911 or emergency medical service. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Move victim to fresh air if it can be done safely. Give artificial respiration if victim is not breathing. Do not perform mouth-to-mouth resuscitation if victim ingested or inhaled the substance; wash face and mouth before giving artificial respiration. Use a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. Keep victim calm and warm. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. (ERG, 2020)

• ACRYLAMIDE
• ACRYLAMIDE SOLUTION
• ACRYLAMIDE SOLUTION, [AQUEOUS]
• ACRYLIC AMIDE
• ETHYLENECARBOXAMIDE
• PROPENAMIDE
• VINYL AMIDE